Відео

You should be hired by Grizzly to teach them how to create comprehensive videos...Thank you!

Thànk U such a good video well done I am in Australia, pine goes through easy , but hardwood is not feeding, so I will follow those measurements, and hopefully hardwood goes through

Gorgeous!

That tool is freakin' amazing. Have you ever tried down-cut bits? Seems like with those micro cuts, they shouldn't cause the machine to hop... and would eliminate all the frazzle & tear out at the top? Also if you're using a spoil board, why not cut down into it just a little to eliminate that little lip at the bottom?

Thanks, this was helpful. Especially how to round over the corners in illustrator before going to cut and your method of using multiple bits to work down to the 1/32" one. Thanks for sharing this.

An expensive tool but an amazing tool. I'll have to sell a kidney.

Great video & inlaying demo~! I'll be getting my Shaper in the mail next week and this gives me several good ideas for projects. Thanks for sharing~!demo

I have been wanting a shaper origin ever since it was debuted, which seems like 10 years ago. This maybe has pushed me over the edge to get it. Also you look just like comedic actor Jon Glaser - it's uncanny.

I'd like to see a close up...Those cuts didn't look so good when you were fitting them.

Nicely done

Thanks for sharing

ok

great video, I watched your other videos and wondering if you could advise if getting a CO2 laser or a Shaper Origin first? I'm a wannabe maker (looking to make wall art, signage/plaques, jewellery/vanity boxes). Your advice and wisdom would be greatly appreciated

I`m old fart and technology pisses me off... that being said, I`m not sure how life was possible pre-UA-cam and people like yourself posting how-to videos? Thanks, and my very best to you and yours!!

I need one of your 20" used thickner

What type/size of blade did you use?

Great video, I have a Grizzly 15 that has been so out of alignment (in every way) that I pretty much stopped using it. Your video provided me with the information I needed to bring the machine back into the Best performance I've ever had--even when new, back in the 1990's! I would suggest to folks that have issues with knees, hips, eyes, etc. I found using a engine lift to pick up the planer and then placing it on a lift cart that uses a hydraulic cylinder foot pump to raise the cart up to a comfortable height made the job enjoyable and allowed pain free adjusting.

Hi, I'm sorry you didn't find the time to talk to us about a possible collaboration. I hope this will be possible in the future. I wish you a wonderful day. Kind regards, Vladimir NTD Television

Greetings, This is Vladimir from NTD Television - ntd com. I wanted to kindly remind you that I sent you a proposal regarding your content. Please see my previous message. We would be happy to know if there is any special requirement for publishing it that we could fulfill. I am looking forward to hearing from you. Thank you Kind regards, Vladimir

Hey Scott, Vladimir from NTD TV here. I contacted you via email offering to raise awareness of your channel. I look forward to your thoughts. Best regards, Vladimir Holecka

Super helpful, thank you!

Nicely done!

How thick are these wooden skins?

Oh wow great idea!!

I have been beating my head against the cast iron table of a 22" P'Matic planer for a few weeks now due to the isssues and adjustments you have outlined and explained in your awesome video. I will now worship at the altar of your greatness!!

Nice tutorial! Thanks for taking the time to produce it.

I love it. Extreme duty ! Extreme garbage.

Great video! Thank you so much.

Big help, thank you

Hello, I wanted to kindly remind you that I sent you a message regarding your videos. Do we have your permission to use them? We would be happy to know if there is any special requirement for publishing your videos that we could fulfill. Thank you! :) Sincerely, Divya

Greetings, Divya here with NTD Television. We are one of the world's fastest growing media companies with over 100 million fans and 1 billion monthly video views across all of our social properties. Our motto is truth, hope, and humanity. We love your videos and our editors would like to showcase it by uploading it on some of our social media pages and websites so that our fans can see it. Of course, we are happy to credit your channel clearly to make sure people know how to find you and your videos. You will still hold the exclusive rights to the video. Can we have your permission to do that? Kind regards, Divya

Quite a beautiful piece! I tried to get the SVG files and only received an error from Dropbox. Have you removed the files?

Best video ever for this.

Thank you for the great information and demonstration. I make small wooden boxes, and want to add some marquetry to the lids, etc., and have a scroll saw on its way. I look forward to following your steps to create some designs.

where did you get the imagepaint plugin?

These weren’t for his son, they were for him…

Super vidéo et super travail Merci Merci

Great video! Thanks for detailing where all of these adjustments are. Do you find the best way to get no snipe with this machine is with a melamine sled like you made?

another consideration is that at such small offsets, if a piece of dry inlay sits in a shop where there is a lot of humidity then it will expand enough that it might not fit into the pocket..

Il prezzo del laser?

Great video, was a big help, now my planer works correctly Thank you !!!!!!!!!!!!!!!!

Thanks for censoring the butt crack. I appreciate that attention to detail!

Pura vida Scott thanks for sharing Can you add more details about how to make the composition of the different pieces thanks and pura vida

This is the best video I’ve seen on the shaper so far. Thinking about getting one and wanted to see how you get designs on the shaper.

Maravilloso resultado ,gracias.

Great video! Love the hot sand tip!

Great video Scott!

Agree, excellent video - am having same twist issue - rotacator on order. Think my belt is also hitting something, small pile of black rubber bits at bottom

Nice video. If you did the kerf offset using the offset tool, then why did you need to put the kerf into the “laser plugin” box? I want to do this method but that confused me

Excellente démonstration